Overview of Powdered Organic Fertilizer: The production line for powdered organic fertilizer is a relatively simple method for processing organic fertilizer, and its processing technology also requires many fewer steps than granular organic fertilizer. The process flow is simple, the investment is low, the land occupation is small, and the investment can be determined based on the amount of raw materials. The powdered organic fertilizer production line is a very simple production line that only requires a few types of equipment from production to finished products to achieve the goal. The main equipment used includes fermentation turners, crushers, screening machines, and packaging machines to produce organic fertilizer.

technological process:

1. Mix the organic fertilizer raw materials, control the C/N ratio at 23-28, and control the moisture content of the materials after proportioning at 52% -68%.

2. Requirements for stacking raw materials: The height, width, and length are arbitrary, and attention should be paid to placing them in naturally ventilated areas.

3. If the temperature of the material pile starts to rise, it indicates that fermentation has begun. When the temperature rises above 60 degrees, it should be kept for 48 hours before starting to flip the pile (but when the temperature exceeds 70 degrees, it must be flipped immediately). When flipping the pile, it must be uniform and thorough, and the lower layer materials should be flipped into the upper part of the pile as much as possible to fully mature. The number of flips should be determined based on the degree of material maturity. At this point, a trough type flipping machine can be used.

After fermentation and maturation, the organic fertilizer can be used directly or dried and packaged for storage.