How to choose a feeder in an organic fertilizer production line? Due to the damage of chemical fertilizers to agricultural ecology, the demand for organic fertilizers has doubled, and large-scale sand and gravel production lines have become a new investment hotspot. The selection of equipment for each link in the organic fertilizer production line is crucial. This article summarizes how to choose a feeder for the organic fertilizer production line?

The fertilizer feeder is located between the feeding bin and the organic fertilizer granulator, which can evenly, timed, and continuously feed block and granular materials from the storage bin to the receiving device, and perform coarse screening on the materials. When designing a sand production line, the vibrating feeder should meet the following technical requirements:

1. Try to minimize the pressure of materials on the tank body. Generally, it is required that the effective discharge port of the warehouse material should not exceed 1/4 of the tank width, and the flow speed of the material should be controlled at 6-18 m/min.

2. For materials with a large feeding amount, a sufficiently high blocking plate should be installed at the bottom discharge of the silo, but the blocking plate should not be fixed on the tank body.

To ensure smooth discharge of the silo, the inclination angle of the rear wall of the silo can be designed to be 55 ° -65 °.