There are many functions of the organic fertilizer turning machine, but no matter how many functions it has, everyone needs to use it correctly and master the correct methods when using it. If you dont master the correct method, you cant fully utilize the function of the organic fertilizer turning machine. So, what are the correct ways to use the organic fertilizer turning machine?

Instructions for using the trough type stacker:

1. Check if the oil and lubrication systems are unobstructed. If they are not, immediately notify maintenance personnel for repair;

2. Check if the oil in the fuel tank is sufficient. If not, add enough

3. Check for leaks in the hydraulic system Before starting up, it is necessary to carefully check whether each part of the mechanism is intact, whether the positions of each transmission handle and speed change handle are correct, and to carefully lubricate and maintain the machinery according to requirements.

Before starting work, all operators must be present at the same time, paying attention to observing the machines and making all necessary preparations;

5. Before starting up, rotate the parts that can be rotated by the machinery, observe if there are any abnormalities when the machinery rotates, and promptly notify the maintenance personnel for repair if any problems are found

6. When starting, first turn on the power switch to power on the machinery, and then turn on the switches of the electric oil pump and each motor for trial operation After parking the track changing car at work, work on the upper frame

7. During the operation of the equipment, if spindle vibration, loud noise, high pressure and temperature exceeding 65 ° C, or other abnormal situations are found, the situation should be immediately checked with the maintenance personnel and dealt with in a timely manner;

8. Except for personnel involved in operation and maintenance, other personnel are prohibited from operating the trough type stacker machinery during operation.

9. In case of mechanical failure, relevant personnel should be notified immediately, the cause should be identified, the fault should be eliminated, and unauthorized handling is not allowed. It is strictly prohibited to work with equipment that is faulty.

10. When stopping the machine after work is completed, the fan should be turned off first and the drum should run for 2-3 minutes to remove mud before stopping the machine. Then do a good job of maintenance, brush off iron filings and dust, lubricate and add oil, and cut off the power supply.

There are many issues that should be paid attention to during the installation and use of the stacker, as proper installation and use have a direct impact on the service life of the stacker.

During the installation and use of the stacker, the following points should be noted:

1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

2. During installation, attention should be paid to the verticality between the main body and the horizontal.

3. After installation, check whether the bolts of each part of the stacker are loose and whether the main engine compartment door is tightened. If so, please tighten it.

4. Configure power lines and control switches according to the power of the equipment.

5. After the inspection is completed, the trough type stacker crane undergoes no-load testing. If the testing is normal, production can proceed