1. Reasons for the one-time drying failure of cattle dung:

(1) The dryer is too small

(2) The calculation of wind pressure and flow rate in the wind net is incorrect.

II. Targeted Solutions:

(1) Increase the temperature of the cattle manure dryer, but this method can easily cause a fire inside the dryer. A better approach is to replace or modify the drying equipment

(2) Require the dryer manufacturer to recalculate the air pressure and flow rate, then provide a design modification plan based on the actual conditions.

3. Causes of Material Combustion in the Cow Manure Dryer:

Improper use of the dryer equipment

(2) The dryer equipment is too small to achieve the desired drying effect, and forced heating leads to ignition

(3) There is a problem with the design principle of the dryer equipment

(4) The material cannot be removed, leading to a fire inside the dryer.

IV. Targeted Solutions:

(1) Negotiate with the manufacturer to obtain the equipment manual and learn the correct usage of the dryer

(2) Replace or modify the drying equipment

(3) Request the manufacturer to replace or modify the drying equipment

(4) Check whether the drying machine equipment is installed correctly, whether there is air leakage, or whether the air pressure needs to be increased.

During continuous production and operation, the cow dung dryer may encounter common issues such as incomplete drying of raw materials or spontaneous combustion inside the dryer. Here, we briefly summarize the causes and simple solutions to these problems, so theres no need to panic if such issues arise.