Chicken manure has high organic matter and nitrogen content, making it a high-quality raw material for producing commercial organic fertilizers. However, fresh chicken manure has high moisture content, heavy ammonia, and contains insect eggs and harmful pathogens. Fermentation and maturation are the core sections of the entire organic fertilizer production line. Many chicken farms are in the planning stage of the project, struggling with whether to choose the fermentation process of trough flipping or closed fermentation tanks. Both processes can achieve high-temperature aerobic composting of chicken manure, but there are significant differences in investment, land occupation, energy consumption, environmental control, and capacity adaptation. Choosing the wrong fermentation equipment can lead to problems such as inadequate maturation, foul odor, delayed production, and high maintenance costs.
Core requirements for aerobic fermentation of chicken manure: the moisture content of the material should be controlled to 50% -60%, the heap should be maintained at a high temperature of 55 ℃ or above for more than 5 days, and the eggs and bacteria should be killed; Adequate oxygen supply, avoiding anaerobic odor, stable material decomposition, and meeting the standards for organic fertilizer raw materials. The trough type turning pile and fermentation tank are the two mainstream fermentation schemes for current chicken manure organic fertilizer projects.
1、 Principle and advantages and disadvantages of trough type flipping fermentation process
Trough type flipping requires the construction of a fermentation tank by civil engineering, equipped with a trough type flipping machine and a bottom ventilation pipe network. Materials are stacked in the fermentation tank, and the flipping machine travels back and forth along the tank to flip, disperse, oxygenate, and displace the mixture of chicken manure and straw auxiliary materials, achieving continuous aerobic fermentation. The fermentation cycle is generally 15-21 days, and a secondary aging workshop is also required at the back end.
Advantages of trough flipping
Lower investment per unit processing capacity: The equipment procurement cost is moderate, and the core investment is concentrated in the construction of fermentation tanks, which is suitable for medium to large-scale chicken manure treatment projects. The daily processing capacity is large, and it is suitable for organic fertilizer plants with an annual output of over 10000 tons.
Strong material adaptability: Various auxiliary materials such as chicken manure, mushroom residue, straw, and sludge can be mixed and fermented, with a higher tolerance for moisture fluctuations in the raw materials and less likely to clog.
Simple operation and maintenance, cheap accessories: The flipping machine has a mature structure, easy maintenance, low daily energy consumption, suitable for long-term stable and continuous production, and workers can quickly get started.
Mature technology and reliable project acceptance: The vast majority of organic fertilizer factories in China adopt trough technology, with many cases of environmental protection, agricultural project filing, and subsidy application, and high process recognition.
Slot type flipping short board
The area is large and requires civil construction: fermentation workshops and concrete fermentation tanks must be built, and the civil construction period is long; It is difficult to land in a factory area with tight space.
Odor collection requires a sealed workshop: the fermentation tank belongs to a semi open system and must be equipped with a sealed factory building+odor collection spray/biological filter. If it is close to residential areas, the pressure of odor control is greater.
Affected by seasonal climate: low temperatures in winter in the north, slow heating of the reactor body, and prolonged fermentation cycle; During the rainy season in the south, the workshop should be well protected against rain to prevent rainwater from seeping into the pile and causing excessive moisture.
Applicable scenarios: Projects with open spaces, civil engineering conditions, daily processing of fresh chicken manure of more than 10 tons, medium and large egg/chicken farms, professional organic fertilizer processing plants, limited budgets, and pursuit of lower processing costs per ton.
2、 Principle and advantages and disadvantages of closed fermentation tank process
Vertical/horizontal closed fermentation tanks are integrated closed aerobic fermentation equipment. Chicken manure is pre treated and mixed with water before being sent into the tank. The tank is equipped with a stirring, forced aeration, and temperature control insulation system, which can quickly complete high-temperature fermentation in a closed space. The fermentation cycle is significantly shortened, usually taking 7-10 days to discharge.
Advantages of fermentation tanks
Extremely small footprint: Vertical fermentation tanks are arranged vertically, without the need for large-scale fermentation tank construction, only requiring equipment foundations, suitable for chicken farms with small factory areas, adjacent villages, and tight land.
Sealed odor control: The tank is fully enclosed, and ammonia and odors are collected and treated in a centralized manner, without overflowing odors. The environmental pressure is low, and the environmental impact assessment is easier to pass.
Not affected by external climate: Equipped with a built-in insulation and temperature control system, stable fermentation can still occur in low temperature environments in northern winter, with minimal fluctuations in production capacity throughout the year.
High degree of automation: One click control for feeding, mixing, aeration, and discharging, with minimal manual labor required. A single person can be on duty at a small chicken farm.
Shortboard of fermentation tank
High one-time investment: The cost of the tank body, insulation, mixing, self-control, and exhaust system is high, and the equipment investment is much higher than that of the trough type flipping scheme for the same treatment scale.
High operating energy consumption: continuous forced aeration, stirring, insulation heating, high electricity cost per ton of material; Internal components are exposed to corrosive materials such as chicken manure for a long time, resulting in rapid wear and high replacement costs for accessories.
Weak adaptability of materials: strict requirements are placed on the pre-treatment of chicken manure, and the raw materials must not contain large impurities or long fibers. Large fluctuations in moisture can easily lead to tank compaction and wall hanging, seriously affecting the composting effect; The upper limit of single tank processing is limited, and increasing production capacity requires multiple units to be connected in parallel, leading to further investment increases.
Discharge only completes primary fermentation: Most of the materials rapidly fermented and discharged from the tank require secondary aging, and direct discharge often results in unstable maturity. It is not recommended to directly pelletize and process commodity organic fertilizers.
Applicable scenarios: Small site, factory area close to residential areas, strict environmental control; Small and medium-sized chicken farms can process 2-10 tons of fresh chicken manure per day; High land costs and unsuitability for large-scale civil engineering projects that pursue rapid production.
3、 Selection of Chicken Manure Fermentation Section with 5 Core Judgment Dimensions
1. Selection of daily chicken manure processing volume and production capacity scale
Daily processing of fresh chicken manure ≥ 10 tons, annual production of organic fertilizer above 10000 tons, priority given to trough type dumping, lower unit processing cost, suitable for large-scale continuous production;
Daily processing of fresh chicken manure is 2-10 tons. Small and medium-sized egg chicken farms can dispose of manure on-site due to limited space, and fermentation tanks can be selected.
2. Site conditions and civil engineering budget
There is sufficient land to build factories and fermentation tanks, and the budget should prioritize investing in civil engineering and selecting tank types; The factory space is limited and cannot be built on a large scale. We hope to quickly install and put into operation, and prioritize fermentation tanks.
3. Environmental protection location, odor control pressure
The factory area is far away from residential areas and is equipped with fermentation workshops and odor treatment facilities. The trough type scheme is completely feasible; The factory is located adjacent to the village, with strict odor control measures. Priority is given to sealed fermentation tanks to reduce the risk of odor disturbance to residents.
4. Local climate conditions
In cold northern regions, it is necessary to ensure proper insulation in the fermentation workshop for trough type fermentation; The fermentation tank comes with insulation for better low-temperature stability. In the rainy areas of the south, trough type workshops should have their roofs protected from rain; The fermentation tank is not affected by rainwater.
5. Budget and long-term operation and maintenance costs are not only based on initial investment
Many customers only compare equipment quotes and ignore the full lifecycle cost. The initial civil engineering investment for trough type construction is large, but the later electricity and maintenance costs are low; Fermentation tank equipment is expensive to purchase, with long-term sustained energy consumption and higher accessory costs. To comprehensively evaluate the total investment over a period of 3 to 5 years, it is not enough to only look at the initial investment.
4、 Suggestions for practical implementation of selection and implementation
Proper front-end pretreatment is a prerequisite for both tank and fermentation tanks. Chicken manure should be pre treated with impurities and mixed with straw, rice husk, and other auxiliary materials to adjust the moisture content and carbon nitrogen ratio. If the moisture content of chicken manure is too high, both fermentation processes will fail.
Dont blindly pursue a single process. You can combine and match some projects using the combination mode of "primary fermentation in fermentation tanks+tank aging". The tank can quickly reduce odor, and the tank can complete deep decomposition, taking into account land occupation, odor, and finished product maturity.
Priority should be given to on-site inspections of projects that use the same raw materials to process chicken manure, to observe the continuous operation status, stack temperature, composting effect, odor control, and equipment failure frequency. Do not only look at the manufacturers showroom prototype.
The synchronized tail gas treatment system for enclosed workshops or fermentation tanks should be equipped with biological filters and spray towers to treat ammonia and odors, ensuring that the exhaust gas meets the emission standards and avoiding environmental inspection risks.
Conclusion
The fermentation section of the chicken manure organic fertilizer production line determines the quality of the organic fertilizer product and the environmental protection bottom line of the project. The advantage of slot type flipping lies in its scale, low cost, and strong material adaptability; Fermentation tanks excel in their small footprint, sealed odor control, and resistance to seasonal disturbances. There is no better equipment available, only solutions that are suitable for project conditions.
Plan a chicken manure organic fertilizer project, do not blindly follow the trend and choose fermentation tanks, nor blindly choose trough type. Based on the daily production of chicken manure, site area, environmental requirements, budget, and long-term operation and maintenance capabilities, a comprehensive judgment is made to match the corresponding fermentation process in order to achieve stable composting of chicken manure and ensure the continuous operation of the entire organic fertilizer production line.